You have a pressure washer and a rendered wall that has gone green. It is tempting. But can you pressure wash render? Before you pull the trigger, read this, because render is one of the easiest surfaces on a house to damage and one of the hardest to put right.
Do not risk your render with a pressure washer.
Send us a few photos and we will tell you how it should be cleaned.
The short answer: no, you should not pressure wash render. High pressure can erode and mark the finish, force water into the wall and widen hairline cracks. Render should be cleaned by soft washing, a low-pressure biocide treatment that kills algae and mould without harming the surface.
Why pressure washing and render do not mix
A driveway is built to take the weight of a car. Render is a thin decorative and protective coat on the outside of your home. Treat them the same way and the render loses.
- It erodes the surface. High pressure strips the fine top layer of the render, leaving it rougher and more porous, so it gets dirty again faster.
- It leaves marks. Lance lines and patches show clearly on a large, flat, pale wall and cannot be washed out afterwards.
- It forces water in. Water driven into the wall at pressure can get behind the render and into hairline cracks.
- It can damage through-coloured render. With these finishes the colour is in the render itself. Damage the surface and you damage the finish.
- It does not last. Pressure removes the growth you can see and leaves the spores, so the green and red return.
Soft wash render cleaning: how it works
Soft washing turns the job around. Instead of using force to knock the growth off, a professional biocide is applied at low pressure and left to do the work. It kills algae, mould and other organic growth at the root, in the texture of the render as well as on the surface.
Because the growth is killed and not just rinsed away, the result lasts far longer than a wash with water alone. We explain the difference between the two approaches in pressure washing vs soft washing.
K Rend, monocouche or silicone render: does the type matter?
Yes, which is why we identify the render and check its condition before choosing how to clean it.
- Through-coloured and silicone renders, such as K Rend and similar systems, are the ones most easily marked by pressure and are soft washed.
- Painted render needs care, because too much force can lift the paint.
- Older sand and cement render and pebbledash can have loose or cracked areas that need to be noted before any cleaning starts.
We follow the manufacturer’s guidance for the finish and test where needed.
What render cleaning cannot do
We would always sooner be straight with you. Cleaning removes biological staining: the green, the red and the black streaks. It cannot remove permanent marks, and it cannot bring back colour that has faded with age and sunlight. Cracks and other defects need separate attention. We explain what to expect before any work starts.
What about a garden hose and a brush?
A gentle rinse will not hurt sound render, but it will not remove established algae either, and scrubbing a textured finish tends to leave uneven patches. Household bleach is not a substitute for a professional biocide. It can discolour the finish and harm the plants below the wall.
After cleaning, we leave a final treatment in the render that keeps it clean for years. See why new render goes green so quickly.
How to choose a render cleaning company
- Ask how they will clean it. The answer should be soft washing, not a pressure washer.
- Ask whether they have identified your render type.
- Ask what will not come out. An honest company will tell you.
- Ask to see before and after photos of render like yours.
- Check they are insured and have real reviews.
Not sure what is on your walls? Read why is my render turning green, red or black? You can see our results, including an urgent clean before estate agent photos, on our render cleaning in Bristol page. If you decide that you also need your gutters cleaned, please let us know when you book, so that we arrive with all the necessary tools. We will give you 50% off gutter cleaning alongside your render cleaning. Take your chance and let us know.
More render cleaning guides
- Render cleaning cost: what affects the price?
- K Rend cleaning: how to remove green algae from K Rend safely
- How to clean render on a house: what works and what to avoid
- Soft wash render cleaning: how it works and why it lasts
- How to clean pebble dash and roughcast walls
- Best render cleaner: shop-bought products vs professional soft washing
- Why does new render go green so quickly?
- Why is my render turning green, red or black?
Pressure washing render: FAQs
Can you pressure wash render?
No. High pressure can erode and mark the finish, force water into the wall and widen cracks. Render should be soft washed.
What is the best way to clean render?
Soft washing. A professional biocide is applied at low pressure and kills algae and mould at the root without damaging the render.
Can you jet wash K Rend?
It is not recommended. Through-coloured renders such as K Rend are easily marked by pressure. They should be cleaned with a low-pressure soft wash.
Will cleaning make my render look new again?
Cleaning removes green, red and black biological staining. It cannot remove permanent marks or restore colour that has faded with age.
Safe render cleaning in Bristol
Soft washing chosen for your render type. 50% off gutter cleaning.