Pebble dash is tough, but it is not easy to clean. Get it wrong and you end up with stones on the path and bald patches on the wall. Here is how to clean pebble dash and roughcast properly, what to avoid and how to keep it clean for longer.
Pebble dash looking grey or green?
Send us a few photos of your walls and we will tell you what they need.
The short answer: pebble dash and roughcast should be cleaned by soft washing, not pressure washing. A pressure washer can knock the stones out of the wall and drive water in behind the render. A zero-pressure biocide treatment, applied without a brush, kills the algae, lichen and mildew without disturbing the stones.
Why pebble dash gets so dirty
Pebble dash is a render with small stones pressed into its surface. Roughcast is similar, with the stones mixed into the coat itself. Both give a wall a very rough, uneven texture.
That texture is the problem. Every stone creates a tiny ledge that holds moisture, dust and spores. Over the years the wall turns grey or green, with darker streaks where water runs down from gutters and sills. On painted pebble dash, the growth sits in the hollows between the stones and makes the whole wall look dull.
Why pebble dash should be cleaned sooner, not later
Cleaning pebble dash is not only about looks. The lichen and mildew that attach themselves to the surface can damage the bond between the pebbles and the wall. The longer they are left, the weaker that bond becomes, and the more stones you lose. The sooner the wall is cleaned, the healthier and stronger that bond stays.
Why you should not pressure wash pebble dash
- It knocks the stones out. The pebbles are only held by the render around them. A jet of water at close range dislodges them and leaves bald patches that are very hard to repair invisibly.
- It drives water behind the render. Older pebble dash often has fine cracks and hollow areas. Forcing water into them makes them worse.
- It strips paint. On painted pebble dash, pressure lifts and flakes the coating.
- It does not last. The spores stay in the texture, so the green comes back.
The same applies to smooth renders, as we explain in can you pressure wash render?
How to clean pebble dash safely
- Check the wall first. Look for loose stones, cracks and hollow-sounding areas. These should be noted before any cleaning starts.
- Soft wash it, with zero pressure and no brush. On pebble dash we do not use a brush on the end of the long-reach pole, because a brush can disturb the pebbles and pull them off the wall. The biocide is applied by soft wash, with zero pressure, three to four times, until the wall is clean. Nothing physically touches the pebbles, so they stay where they are.
- Leave a final treatment in the wall. It is absorbed into the render, it is compatible with it, and moisture in the air keeps it active. That stops the growth from taking hold again for years.
The method is the same one we describe in soft wash render cleaning: how it works and why it lasts.
Can you clean pebble dash yourself?
You can rinse off loose dirt gently with a garden hose and treat light green growth low down with a shop-bought cleaner. Avoid stiff brushes, which catch on the stones and pull them out. For a whole wall, or anything above head height, the rough surface makes it hard to apply a product evenly from a ladder. See best render cleaner: shop-bought products vs professional soft washing.
What cleaning will not fix
Cleaning deals with staining and growth. It will not replace missing pebbles, close cracks or fix areas where the render has come away from the wall. Those are repair jobs. If we see them, we will point them out before we start.
Cleaning pebble dash before painting
If you are planning to paint pebble dash, it should be clean and free of growth first. Paint applied over algae does not bond properly. A soft wash kills the growth so the new coating is going on to a sound surface.
Pebble dash and roughcast cleaning in Bristol
Many Bristol homes have pebble dash or roughcast walls, and they respond very well to a proper soft wash. See our results on the render cleaning in Bristol page, or read our general guide on how to clean render. If you decide that you also need your gutters cleaned, please let us know when you book, so that we arrive with all the necessary tools. We will give you 50% off gutter cleaning alongside your render cleaning. Take your chance and let us know. Send us a few photos of your walls and we will tell you what they need.
More render cleaning guides
- Render cleaning cost: what affects the price?
- K Rend cleaning: how to remove green algae from K Rend safely
- How to clean render on a house: what works and what to avoid
- Soft wash render cleaning: how it works and why it lasts
- Best render cleaner: shop-bought products vs professional soft washing
- Why does new render go green so quickly?
- Why is my render turning green, red or black?
- Can you pressure wash render?
Cleaning pebble dash and roughcast: FAQs
How do you clean pebble dash?
Pebble dash is cleaned by soft washing. A biocide is applied with zero pressure, three to four times, without a brush, so nothing touches or dislodges the stones.
Can you pressure wash pebble dash?
It is not recommended. A pressure washer can knock the stones out, strip paint and drive water into cracks behind the render.
What is the best pebble dash cleaner?
A biocide-based treatment applied at low pressure. Shop-bought cleaners can help with light growth, but are hard to apply evenly to a rough, high wall.
Should pebble dash be cleaned before painting?
Yes. Algae and mould should be killed and removed first, because paint does not bond properly to a surface with growth on it.
Pebble dash and render cleaning in Bristol
Safe soft washing with a final treatment that lasts. 50% off gutter cleaning.