Block Paving Sealing in Bristol

We clean, dry, re-sand and seal block paving across Bristol, in the right order and in the right weather, so the sealant cures properly, the weeds stay out and oil stays on the surface instead of soaking in.

Driveway cleaning in Bristol - block paving beforeDriveway cleaning in Bristol - block paving after

Professional Block Paving Sealing Services in Bristol

Block paving sealing is the last step in protecting a driveway or patio. Done properly, it keeps the joints solid, slows the weeds and stops oil and paint from soaking into the blocks.

Done in a hurry, it traps moisture and turns white. GB Cleaning seals block paving across Bristol the careful way. Every job includes:

If you would like your block paving sealed in Bristol, request a free quote or call us today.

Free Quote
Request a Free Quote



    Add photos (optional) – they help us quote faster





    Certified & Fully Insured Team

    Block Paving Sealing in Bristol: Cleaned, Dried, Sanded, Then Sealed

    A sealed driveway keeps its colour, keeps its sand and keeps the weeds out. But block paving sealing only works when it is done in the right order and in the right weather. Rush it, and the sealant turns white. This is how we seal block paving in Bristol, step by step.

    • Step 1Block paving cleaningThe paving is treated, cleaned with a flat surface cleaner or a turbo nozzle (depending on how dirty it is) and treated again after the clean.
    • Step 2Two to three sunny days of dryingThe paving is then left to dry for two to three sunny days, so that the water in the joints has time to evaporate completely.
    • Step 3Kiln-dried sand, on the day of sealingThe sand goes into the joints only on the day we seal. We do not put it back on the day we clean, even when the weather is dry and sunny, because we want the joints to air and dry out properly first.
    • Step 4SealingThe sealant is applied on a sunny day, with at least 12 hours before the first rain. Not less. That gives the sealant time to cure, so water cannot get in through it.

    What happens when these steps are rushed: white, milky patches

    If block paving is sealed while there is still water in the joints, or if it rains before the sealant has cured, the result is known as blooming: white, milky spots and cloudy patches across the surface. The water is trapped under the sealant. When it tries to evaporate, it pushes the sealant up from below and turns it white. It is the most common reason a freshly sealed driveway looks worse than it did before, and it is exactly why we wait for the paving to dry and for the right weather.

    The Benefits of Sealing Block Paving

    It inhibits weeds

    Sealed joints give weed seeds nowhere to settle and grow.

    The joints become solid

    The sealant binds the sand in the joints, so it stays in place and the blocks stay locked together.

    Oil stays on the surface

    If oil leaks from a car, the sealant stops it soaking into the blocks. It stays on the surface, where it is much easier to clean off.

    Paint spills clean up more easily

    The same goes for an accidental paint spill. It cannot penetrate the block paving, so it can be dealt with far more easily.

    How much does block paving sealing cost in Bristol?

    The price depends on the size of the area and the condition of the paving. Send us a few photos and the approximate size, and we will give you a price for cleaning, re-sanding and sealing together. Block paving cleaning on its own starts from £5 per square metre. Our aim is not to have the lowest prices, but to deliver the best quality service for the price that you pay.

    More about block paving

    What Our Customers Say on Google

    Bristol and surrounding areas we serve

    Looking for block paving sealing near you? We work across Bristol and the surrounding areas.
    Contact Us!
    Block Paving Sealing Services in Bristol

    Online Booking

      Add photos (optional) – they help us quote faster





      FAQs About Block Paving Sealing in Bristol

      Is it worth sealing block paving?
      Yes. Sealing inhibits weeds, makes the joints solid so the sand stays in place, and stops oil and paint spills soaking into the blocks, so they are much easier to clean off.
      We leave two to three sunny days between cleaning and sealing, so the water in the joints has time to evaporate completely.
      White, milky patches are known as blooming. They appear when water is trapped under the sealant. As it tries to evaporate, it pushes the sealant up and turns it white.
      What weather do you need to seal block paving?
      A sunny day, with at least 12 hours before the first rain. That gives the sealant time to cure, so water cannot get in through it.
      Only on the day of sealing. We do not re-sand on the day of cleaning, even in dry weather, because the joints need time to air and dry out first.
      Sealing inhibits weeds by binding the sand and closing the joints, so seeds have nowhere to settle. It greatly reduces weed growth.
      We provide block paving sealing across Bristol and the surrounding areas. Send us a few photos and your postcode for a quote.
      Free Quote

      Request a Free Quote

        Add photos (optional) – they help us quote faster